And with its two batteries, we had plenty of juice to finish most jobs. The self-tapping modes proved their worth when we drove screws into metal studs, as we were able to easily start the screws and prevent over-driving them and stripping them out. There are three speeds and two self-tapping screw modes-one for small fasteners, another for large ones. We’ve come to appreciate impact tools with special drive modes, and this one comes with five. As such, its Quick Eject Hex comes equipped with advanced features that make it a versatile performer. Impact driver, 5-Ah battery, 2.5-Ah battery, charger, hard caseĪ relative newcomer to the cordless-tool arena, Flex has aimed high with tools designed for contractors and building trade professionals. The Atomic has three LEDs oriented around the chuck, which illuminate the work area very well, leaving no shadows.
Impact driver drill drivers#
And tight, dark places bring us to one of our favorite features (noted on other DeWalt drivers we’ve tested, too): lighting. This means you’ll be able to reach into tighter places than with other models. We measured the length of the compact tool’s head at 4 inches, which is super short-even compared to smaller 12-volt drivers. As with other models we tested, long lag bolts took the most work, but we were able to drive them in steadily without drama using the DeWalt. Long deck and cabinet screws drove equally well, as well as self-tapping screws in metal studs. Nothing we drove during testing fazed the Atomic much. However, the lower speed does work well for starting screws-especially self-tapping fasteners. As far as we could tell during testing, it isn’t, and the specs don’t mention anything about it.
Alongside the lowest speed setting (1,000 RPM) is a screw icon that suggests a screw-driving mode. The 20-volt Atomic is a solid, contractor-quality tool with three driving speeds. Impact driver, 5-Ah battery, charger, soft case The selection of hex bits here is comprised of some of the best we’ve tested, designed specifically for impact drivers. Plain 1⁄4-inch hex bits meant for use with a drill/driver may work with an impact driver in a pinch, but will not hold up over time. When you add an impact driver to your arsenal, you’ll need impact-rated 1⁄4-inch hex bits. This delivers significantly more torque than a drill, yet is less likely to twist your wrist if the fastener stops or binds. It drives and removes by applying concussive, rotational force to the screw or bolt head. Faster than a cordless drill, an impact driver’s compactness makes it easier to handle, especially in tight spots or when you’re standing on a ladder. This tool is designed to drive wood and sheet-metal screws, but it can also turn a bolt or drill a hole using the appropriate impact-rated bits. Best in Tight Spaces: Milwaukee M12 Fuel SurgeĪ dedicated impact driver, unlike a drill-driver, has a spring-loaded, quick-release chuck that accepts 1⁄4-inch hex-shank driver bits.Best on a Budget: Hart 20-Volt Impact Driver Kit.Best for Serious DIYers: Kobalt XTR Max.Best Value: Ryobi One+ HP Drill and Impact Driver Set.Take a look at quick info on the top impact drivers from our testing, then scroll down for buying advice and in-depth reviews. One can make myriad tasks easier, such as building decks, screwing down plywood, installing tile backer board, or any other job that requires driving long screws into wood. And that’s good, but we’d argue for also investing in a dedicated impact driver. One of the first power tools people buy is usually a cordless drill-driver due to its versatility.
0 kommentar(er)
